Engineering
Engineering, 14.12.2021 14:00, onlymyworld27

❤A:N:Y TRÚ$:TÉD G-ir-ls❤ ⚠️S € X WITH-OUT FÀC€⚠️

➡M-€€-TÍNG ©0DÉ⬇

➡rcidzdsyym


❤A:N:Y TRÚ$:TÉD G-ir-ls❤

⚠️S € X WITH-OUT FÀC€⚠️➡M-€€-TÍNG ©0DÉ⬇➡rcidzdsyym

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
image
Engineering, 04.07.2019 19:20, Katmcfee7681
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
image
Engineering, 04.07.2019 19:20, carterdaw
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
Do you know the correct answer?
❤A:N:Y TRÚ$:TÉD G-ir-ls❤ ⚠️S € X WITH-OUT FÀC€⚠️

➡M-€€-TÍNG ©0DÉ⬇

➡rcidzdsyy...

Questions in other subjects:

Konu
Business, 10.11.2019 14:31