Engineering, 14.12.2021 01:20, babyduck0664

1. Flexural Strenght Determination : Test prism No. 1: Length 159.4 mm Width: 40.0 mm Height: 40.0mm

Mass : 582 g Maximum Load: 3.6 KN

Test Prism No. 2: Length : 159.4 mm Width: 40.0 mm Height: 40.0mm

Mass: 575 g Maximum Load: 3.6 KN

Test Prism No. 3: Length : 159.6 mm Width: 40.0 mm Height: 39.9 mm

Mass: 586 g Maximum Load: 3.6 KN

2. Compressive Strength Determination :

Maximum Load (prism halves) (kN) : 82.0 84.3 75.7 80.4 71.8 74.2

Decide, if the test is valid according EN 197-1!

Decide, if the cement complies with the requirements of EN 197-1

1. Flexural Strenght Determination :

Test prism No. 1: Length 159.4 mm Width: 40.0 mm Height: 40.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

Engineering, 04.07.2019 19:20, carterdaw

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

continue

Do you know the correct answer?

1. Flexural Strenght Determination : Test prism No. 1: Length 159.4 mm Width: 40.0 mm Height: 40.0...