Engineering, 14.12.2021 01:00, kitykay2776
An estimate of the uncertainty for the concentration of an unknown sample can be determined based on the uncertainty in the calibration data set and the unknown sample analysis. The uncertainty (Sx) value is unitless when using the internal standard method of calibration. The uncertainty needs to be expressed in terms of the concentration units used for the standards (i. e. ppm). Calculated the uncertainty value in terms of concentration (Sc) for the diluted AND undiluted sample based on the following information.
Uncertainty (Sx; unitless) based on the calibration data set and the unknown sample. Sx = 0.0152
Sample preparation: A whiskey sample is prepared for analysis by GC-FID using the internal standard method of calibration. A 20 mL sample is transferred using a volumetric pipet to a 50 mL volumetric flask. A volume of stock solution of the internal standard is added to the sample flask. The flask is diluted to volume.
Concentration of the internal standard in the diluted unknown = 500 ppm.
A. Sc(dilute) = 8 ppm, Sc(undilute) = 20 ppm
B. Sc(dilute) = 7 ppm, Sc(undilute) = 19 ppm
C. Sc(dilute) = 7.75 ppm, Sc(undilute) = 19.31 ppm
D. Sc(dilute) = 8 ppm, Sc(undilute) = 30 ppm
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Do you know the correct answer?
An estimate of the uncertainty for the concentration of an unknown sample can be determined based on...
Questions in other subjects:
English, 11.01.2021 09:10
Mathematics, 11.01.2021 09:10
Business, 11.01.2021 09:10
