Engineering, 05.12.2021 17:20, saniyawilliams1207

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75 W/mK. The size of brass wall is 0.5 m x 0.5 m. The mean temperature of wall and air are 90C and 30C, respectively. It is desired to increase the heat transfer rate by adding rectangular brass fins 1 mm thick, 25 mm in length and pitched 10 mm apart (center to center). Convective heat transfer coefficient between the wall and the air is 15 W/m2 K. a. Calculate the increase in the heat transfer from the wall as a result of adding fins.
neglect heat loss from the tip.
b. Determine the overall effectiveness of the fins.

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Do you know the correct answer?

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75 W...