Engineering, 01.12.2021 04:40, historygal

A thermocouple is placed in an exhaust pipe in a diesel engine. Thermocouple is reading 500oC, while the exhaust pipe is at a temperature of 350oC. Thermocouple used to measure the temperature of a gas flow is constructed of two bare wires. Thermal conductivity of one wire is 19.2 W/m-k and the other is 29.8 W/m-k. Heat transfer coefficient between gas and each wire is 200 w/m^2-k. Estimate the conduction error in the measurement of gas temperature. The wire is 5 cm long and 1.5 mm in diameter.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, aliopqwas

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

continue

Engineering, 04.07.2019 19:20, amcd2002

A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.

Answers: 2

continue

Do you know the correct answer?

A thermocouple is placed in an exhaust pipe in a diesel engine. Thermocouple is reading 500oC, while...