Engineering, 30.11.2021 23:50, Freindofafreind

A hydraulic motor has an actual flow rate into the motor of 72 LPM at a pressure of 12,000 kPa. If the motor speed is 800 RPM and if the total power loss of the motor is 3 kW, find the actual torque delivered by the motor and the overall efficiency of the motor.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 06.07.2019 03:10, cicimarie2018

What is the direction and how to operate the lathe?

Answers: 2

continue

Engineering, 06.07.2019 03:20, mardell2587

Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing

Answers: 3

continue

Do you know the correct answer?

A hydraulic motor has an actual flow rate into the motor of 72 LPM at a pressure of 12,000 kPa. If t...