Engineering, 25.11.2021 07:40, maddyr04
R-134a is expanded in an expansion valve or trap from an inlet state of 50 C (saturated liquid) to a pressure of 0.2 MPa. If the heat transfer rate to or from the valve is negligible (there is no work done either), what is the temperature of the refrigerant at the exit
Answers: 2
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
R-134a is expanded in an expansion valve or trap from an inlet state of 50 C (saturated liquid) to a...
Mathematics, 02.03.2021 15:10
Arts, 02.03.2021 15:10
Mathematics, 02.03.2021 15:10
Mathematics, 02.03.2021 15:10
Arts, 02.03.2021 15:10
Biology, 02.03.2021 15:10