Engineering, 05.11.2021 17:20, alfarodougoy8lvt

A Ground water was anaylzed as follows; Co2= 30 mg/L as CaCO3
Ca2+= 180 mg/L as CaCO3
Mg+2= 120 mg/L as CaCO3
Na+= 80 mg/L as CaCO3
Alkalinity = 360 mg/L as CaCO3
SO42- = 10 mg/L as CaCO3
Cl- = 10 mg/L as CaCO3
pH = 7.2
Would softening be recommended for this water? Determine the following quantities (as mg/L of CaCO3): Total hardness, calcium hardness (both carbonate hardness [CH] and non-carbonate hardness[NCH]), and magnesium hardness (both CH and NCH)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Do you know the correct answer?

A Ground water was anaylzed as follows; Co2= 30 mg/L as CaCO3
Ca2+= 180 mg/L as CaCO3
...