Engineering
Engineering, 27.10.2021 01:30, Josephcastillo5246

A thick-walled cylindrical tube has inner and outer diameters of 2 cm and 5 cm, respectively. The tube is evacuated and contains a high-temperature radiation source along its axis giving a net radiant heat flux into the inner surface of the tube of 105 W/m2. The outer surface of the tube is convectively cooled by a coolant at 300 K with a convective heat transfer coefficient of 120 W/m2 K. If the conductivity of the tube material is 2.2 W/m K. Requried:
Determine the temperature distribution T (r) in the tube wall. Also determine the inner-surface temperature.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
image
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Do you know the correct answer?
A thick-walled cylindrical tube has inner and outer diameters of 2 cm and 5 cm, respectively. The tu...

Questions in other subjects:

Konu
History, 01.02.2021 03:20
Konu
History, 01.02.2021 03:20
Konu
English, 01.02.2021 03:20
Konu
Physics, 01.02.2021 03:20