Engineering
Engineering, 25.10.2021 01:00, katrinanuez

On Friday 5th July 2020, at 3.35 pm, a forklift driver, Max White, was driving the forklift he usually operates in the Sunny Side Warehouse, ABC Street, when the front right tire got caught on a piece of wood on the ground, causing the forklift to overturn with Max inside it. Luckily a co-worker was nearby to help Max climb out of the right side of the forklift. Max was shaken up and reported that his left shoulder and left side of his neck were hurting him from the impact. Max decided he did not need to go to the hospital as he felt like he would only obtain bruises from his injuries and that they were not severe enough to require medical attention. His manager sent him home for the rest of the day to ensure he did not strain himself further. The wood that caused the forklift to overturn had not been appropriately stacked and has now been moved to a secure location in the warehouse to make sure it does not cause any more issues for forklift drivers". 3.1 Who is responsible for this workplace accident? Explain your answer(10)

3.2 How could this accident have been prevented? (10)

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Do you know the correct answer?
On Friday 5th July 2020, at 3.35 pm, a forklift driver, Max White, was driving the forklift he usual...

Questions in other subjects:

Konu
Chemistry, 09.11.2020 22:50
Konu
Chemistry, 09.11.2020 22:50
Konu
Social Studies, 09.11.2020 22:50
Konu
Business, 09.11.2020 22:50