Engineering, 20.10.2021 21:10, balla40

For Ke= 0.577 in. H2O-min/ft and Ks= 0.00986 in. H2O-min-ft/gr, design a reverse-air baghouseto filter 20,000 cfm of air with 2.5 gr/ft3of flour. Assume a cleaning time of 3.0 minutes anda filtration time of 60 minutes. In your design, specify the number of compartments, themaximum filtering velocity, the cloth area per compartment, and the total number of bagsrequired if each bag is 10 ft long and 1 ft in diameter. Also, specify the maximum pressuredrop that will be experienced during the run.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

Do you know the correct answer?

For Ke= 0.577 in. H2O-min/ft and Ks= 0.00986 in. H2O-min-ft/gr, design a reverse-air baghouseto filt...