Engineering, 20.10.2021 14:00, sunflowerdaisy35

The Next Manufacturing Revolution is Here 1. What are the three previous manufacturing revolutions Mr. Scalabre mentions? When did these take place?

2. Why does Mr. Scalabre believe we are not growing in productivity? How do we turn these shortcomings into the next big manufacturing revolution?

3. How is robotics making an impact on productivity?

4. How has 3D printing made an impact on productivity?

5. What role do you feel engineers and experts in technology will play in this next revolution? What are some other ways they will contribute to increasing productivity?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

Do you know the correct answer?

The Next Manufacturing Revolution is Here 1. What are the three previous manufacturing revolutions...