Engineering, 20.10.2021 09:00, briannaseaton123

At the instant under consideration, the cable attached to the cart of mass m1 is tangent to the circular path of the cart. If the upward speed of the cylinder of mass m2 is v2 = 3.0 m/s, determine the magnitude of the acceleration of m1 and the tension T in the cable. What would be the maximum speed of m2 for which m1 remains in contact with the surface? Use the values R = 7.75 m, m1 = 0.8 kg, m2 = 0.9 kg, and β = 31°

At the instant under consideration, the cable attached to the cart of mass m1 is tangent to the cir

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 19:10, kayleeemerson77

Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)

Answers: 3

continue

Engineering, 05.07.2019 19:10, justin20080

Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?

Answers: 1

continue

Engineering, 06.07.2019 02:30, piperk19

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

continue

Do you know the correct answer?

At the instant under consideration, the cable attached to the cart of mass m1 is tangent to the circ...