Engineering, 10.10.2021 14:00, allyyzz
In the design test, a light sawtooth belt is wound around a sprocket (sawtooth wheel) with an average radius of r = 20 cm. The belt is horizontal and angular a = 15°, and both ends are fixed to the right vertical wall. Initially, the tension of the upper and lower belts is equal to T0 = 100 N. Find the tension T1 and T2 acting on the upper and lower belts when applying counterclockwise moment M = 10 N*m to the sprockets, respectively.
Answers: 3
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
In the design test, a light sawtooth belt is wound around a sprocket (sawtooth wheel) with an averag...
Computers and Technology, 12.02.2020 21:00
Mathematics, 12.02.2020 21:00
Spanish, 12.02.2020 21:00