Engineering, 15.09.2021 23:50, powella033

ELECTRICAL TEST Part A - Technical
What color wiring is used for the following:
1. AC Control circult 150 volts or less
2. Voltages over 150 volts
3. DC Control Circuit 150 volts or less
4. Wire is not de-energized when disconnect is off
5. Equipment grounding (non-current carrying)
6. Grounded Circuit (current carrying)
7. What is the difference between THHN vs. MTW wire?
8. What is the purpose of a diode placed in parallel to relay?
9. What does CRM stand for?
10. What does PLC stand for?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Do you know the correct answer?

ELECTRICAL TEST Part A - Technical
What color wiring is used for the following:
1. AC...