Engineering
Engineering, 06.09.2021 21:50, fanofhope31

A simple way to model air pollution over a city is with a box model that assumes complete mixing and limited capability for the polllution to disperse horizontally or vertically except in the directin of the prevailing winds (for example, a town locted in a valley with an inversion later above it). Consider a town having an inversion at 250m, a 20-km horizontal distance perpendicular to the wind, a windspeed of 2m/s, and a carbon monoxide emission rate of 60kg/s. Assume the CO is conservative and completed mixed in the box. Required:
What would be the CO concentration in the box?

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
image
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Do you know the correct answer?
A simple way to model air pollution over a city is with a box model that assumes complete mixing and...

Questions in other subjects:

Konu
Mathematics, 21.02.2020 23:54
Konu
History, 21.02.2020 23:54
Konu
Mathematics, 21.02.2020 23:54