Engineering
Engineering, 06.09.2021 21:30, Clup0211

A garment to protect the wearer from toxic agents may be made of a fabric that cantains an adsorbent such as activated carbon. in a test of such a fabric, a gas stream containing 7.76 mg/L of carbon tratrachloride CCl4 was passed through a 7.71 g sample of the fabric at a rate of 1.0 L/min, and the concentration of CCl4 in the gas leaving the fabric was monitored. the run was continued for 15.5 min with no CCl4 being detected, after which the CCl4 concentration began to rise. A) how much CCl4 was fed to the system during the first 15.5 min of the run? how much was adsorbed? using this information as a guide, sketch the expected concentration of CCl4 in the exit gas of a function of time, showing the curve from t=0 to t>>15.5 min.
B) assuming a linear relationship between the current amount of CCl4 adsorbed and mass of fabric, what fabric mass would be required if the the feed concentration is 5 mg/L, the feed rate 1.4 L/min, and it is desired that no CCl4 leave the fabric earlier than 30 min?

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
image
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
image
Engineering, 04.07.2019 19:10, pedropaulofpedrosapp
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg. m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
image
Engineering, 04.07.2019 19:20, zoebtharpe
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
Do you know the correct answer?
A garment to protect the wearer from toxic agents may be made of a fabric that cantains an adsorbent...

Questions in other subjects:

Konu
Chemistry, 01.08.2019 08:00