Engineering, 26.08.2021 14:00, mahmudabiazp3ekot

A) If H = 10 cos (3.5 × 1011 t – 1.5 β x) az A/m. Use Maxwell’s equations to obtain (12) (CLO-4) Expressions for B, D, E, J and β. Assume μ = 10-6 H/m, ε = 10-11 F/m, and σ = 0 everywhere.
b) For the sliding bar, lying in the field B = 0.6 az T, velocity of the bar v = 2/5 e17y ay m/s and
d = 14 cm. Assume y = 0 at t = 0. Find:

i. v (t = 0)
ii. y (t = 0.6)
iii. v (t = 0.6)
iv. V (potential difference) at t = 0.6 as indicated by the voltmeter.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Do you know the correct answer?

A) If H = 10 cos (3.5 × 1011 t – 1.5 β x) az A/m. Use Maxwell’s equations to obtain (12) (CLO-4) E...