Engineering, 22.08.2021 08:30, amastar
I have to resolve this exercise I am stuck here because I lost this class
An alternating current circuit has the following charges, determine:
-Active, apparent and reactive power.
-Draw the power diagram.
-Determine the value of the capacitor in parallel to raise the power factor to 0.95.
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Engineering, 04.07.2019 19:10, lexie223
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
I have to resolve this exercise I am stuck here because I lost this class
An alternating current c...
Mathematics, 25.10.2020 22:30
Mathematics, 25.10.2020 22:30
Arts, 25.10.2020 22:30
Social Studies, 25.10.2020 22:30
History, 25.10.2020 22:30
Chemistry, 25.10.2020 22:30