Engineering, 19.08.2021 23:30, gwenparks

Experimental measurements of the convection heat transfer coefficient for a square bar in cross flow yielded the following values: h1=50 W/m^2⋅K when V1=20 m/s
h2=40 W/m^2⋅K when V2=15 m/s

Assume that the functional form of the Nusselt number is
¯¯¯¯¯¯¯¯
Nu= C Re^mPr^n
where C, m, and n are constants.

a. What will be the convection heat transfer coefficient for a similar bar with L = 1 m when V = 15 m/s?
b. What will be the convection heat transfer coefficient for a similar bar with L = 1 m when V = 30 m/s?
c. Would your results be the same if the side of the bar, rather than its diagonal, were used as the characteristic length?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 06.07.2019 03:10, lwattsstudent

List and describe in sequence the operation process steps for boxf machine?

Answers: 1

continue

Engineering, 06.07.2019 04:30, hallynwright9722

At steady state, air enters an insulated duct of varying cross-sectional area (similar to a nozzle or diffuser) at 200 kpa, 52°c with a mass flow rate of 0.5 kg/s. at the duct exit, the pressure of the air is 100 kpa, the velocity is 255 m/s, and the cross-sectional area is 2 x 10-3 m^2. assuming an ideal gas model, determine: a)-find the specific volume of the air at the exit, in m3/kg. b)- the temperature of the air at the exit, in k. c)-the velocity of the air at the inlet, in m/s. d)-the inlet cross-sectional area, in m^2.

Answers: 1

continue

Do you know the correct answer?

Experimental measurements of the convection heat transfer coefficient for a square bar in cross flow...