Engineering, 18.08.2021 15:50, jbcupcake

A concentric tube arrangement, for which the inner and outerdiameters are 80mm and 100mm, respectively, is used to remove heatfrom a biochemical reaction occurring in a 1-m-long settlingtank. Heat is generated within the tank at a rate of 10^5W/m^3, and water is supplied to the annular region at a rate of 0.2kg/s. Required:
Determine the inlet temperature of the supply water that willmaintain an average tank surface temperature of 37 degrees C. Assume fully developed flow and thermal conditions. Is this assumption reasonable?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Do you know the correct answer?

A concentric tube arrangement, for which the inner and outerdiameters are 80mm and 100mm, respective...