Engineering, 10.08.2021 15:10, kpopqueen0

The following data pertains to a hydraulic press: The diameters of the plunger and ram are 50 mm and 0.5 m respectively.

The ram is 1.75 m below the plunger and the mass density of the liquid

in the hydraulic press is 820 kg/m3. The mass of the plunger and the ram

are 6 kg and 400 kg respectively. The plunger is forced vertically down

by a lever with a mechanical advantage of 6 to 1 onto which a force of

800 N is applied. The ram moves upwards when the plunger moves

downwards. Determine the maximum lifting force exerted by the ram.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

Do you know the correct answer?

The following data pertains to a hydraulic press: The diameters of the plunger and ram are 50 mm an...