An open wall consist in succession layer of fire bricks (Kf=1.21j/m²°C) a layer of lagging bricks(Kl=0.08j/m²°C) and a layer of bricks (Kb=0.6m²°C)each layer is 10cm thick, the temperature in the inside of the wall is 872°C ,on the outside 32°C. calculate the following (a)heat lost by conduction every 12 hours if the surface area of the wall is 20 m² (b) temperature in the middle of the layer of lagging bricks (c)overall heat transfer coefficient

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)