Engineering
Engineering, 24.07.2021 14:00, ptrlvn01

a boiler delivers 5400kg of steam per hour at a pressure of 750KN/m^2 and with a dryness fraction of 0.98.The feedwater of the boiler is at a temoerature of 41.5 °c . The coal used for firing the boiler haas a calorific value of 31000KJ/kg and is used at the rate of 670Kg/hr. Determine the thermal efficiency of the boiler and the equivalent evaporation F and A 100 °c .​

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Do you know the correct answer?
a boiler delivers 5400kg of steam per hour at a pressure of 750KN/m^2 and with a dryness fraction of...

Questions in other subjects:

Konu
Chemistry, 12.02.2021 18:40
Konu
Mathematics, 12.02.2021 18:40