Engineering, 17.07.2021 03:00, sewolf1234
Use the equilibrium phase diagram on the following page to answer the following three questions. For each question, assume that the original solder composition is 30 wt% Sn.
1.What is the approximate average Sn content of the solid that has formed at 400°F?
2.What is the proportion of solid at 400°F?
3.What proportion of the final microstructure will be eutectic?
Answers: 3
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Use the equilibrium phase diagram on the following page to answer the following three questions. For...
Mathematics, 17.11.2020 19:50
Mathematics, 17.11.2020 19:50
Mathematics, 17.11.2020 19:50
English, 17.11.2020 19:50