Writing assembly language program for MC6800 Microprocessor for copying data aftervalidation. Consider the following memory mapAddressData0030H05H0031H06H0032H 09H0033H11H0034H14HEach data will be copied from these locations (0030H to 0034H) to new locations starting from$0040. Before copying, each data will be checked, whether it is an odd or even. If odd, it will be converted to even and if even, it will be converted to odd before copying. Your program must work for any data stored in the above memory locations. Procedure:1.Write the program in 6800SDK Emulator, assemble and run it. Once done, upload the program for evaluation.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79