Engineering
Engineering, 01.07.2021 17:40, janilaw1

Given the 1-hour unit hydrograph for a particular watershed, determine the peak flow for a 3-hour storm with direct runoff of 3 cm in the first hour, 2 cm in the second hour, and 4 cm in the third hour 1-hour Unit Hydrograph
Time (hr) 0 1 2 3 4 5 6 7 8
Q(m^3/s) 0 2 4 7 5 3 2 1 0

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, rjone8429
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
image
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
image
Engineering, 06.07.2019 03:30, neariah24
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
image
Engineering, 06.07.2019 04:10, keke6361
Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.
Answers: 3
Do you know the correct answer?
Given the 1-hour unit hydrograph for a particular watershed, determine the peak flow for a 3-hour st...

Questions in other subjects:

Konu
Mathematics, 28.06.2020 21:01