Engineering
Engineering, 01.07.2021 15:40, amayarayne5

Consider a sphere ball that is made of a hypothetical metal. The diameter of the sphere ball is 0.5 m. The properties of the sphere ball k = 1 W/m-K, Q = 1 X 10-6 m2/s. The sphere ball is initially at a uniform temperature of 10 °C and is dropped into water at 90 °C. The convective heat transfer coefficient is h = 100 W/m2K. Determine the temperature at r = ro/4 from the center of the sphere ball 20 minutes after the sphere ball is dropped into the water using the one-term approximation method. Please elaborate your answer. Your answer must include Biot number, constants such as A1, explanation on your solving process, and the estimation for the temperature value. Grading rubric: accurate estimation of Biot number (15 points), accurate estimation of constants such as A1 (15 points), accurate use of equations and accurate estimate for the temperature (20 points). Note: You are not allowed upload any file. HTML Editor is disabled.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Do you know the correct answer?
Consider a sphere ball that is made of a hypothetical metal. The diameter of the sphere ball is 0.5...

Questions in other subjects:

Konu
Mathematics, 22.01.2020 20:31