Engineering, 30.06.2021 18:40, jakeisadog698

100 kg of - is to be cooled from 10 degrees * C to - 20 degrees * C . The diameter of the Spherical liver equals 7cm. Assume that the density of the liver is equal to 1000 kg/m3 , heat transfer coefficient and convection equals to 50 W/m2 . K. (the air temperature equals -30 C.) A. chose one only 1- Using the specific heat, determine the amount of heat that must be removed from the lamb. 2- How much actual heat must be removed during this process? B. Estimate the time required for freezing. l

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 06.07.2019 04:10, mooneyhope24

Ir at sea level and 30°c and 50% relative humidity flows at a rate of 1 kg/s through a cooling coil that has an apparatus dewpoint of 10°c. the air leaves the coil at 15°c. determine the following: 3.1)- relative humidity of the air leaving the coil; 3.2)- moisture content of the air leaving the coil; 3.3)- sensible heat factor; 3.4)- total heat transfer rate; 3.5)- sensible heat transfer rate 3.6)- latent heat transfer rate

Answers: 1

continue

Engineering, 06.07.2019 05:10, IanMH

Does the hardness of a sheet metal have an effect on its springback in bending? explain.

Answers: 1

continue

Engineering, 06.07.2019 05:10, cedricevans41p4j3kx

It has been stated that the quality of the sheared edges can influence the formability of sheet metals. explain why

Answers: 3

continue

Do you know the correct answer?

100 kg of - is to be cooled from 10 degrees * C to - 20 degrees * C . The diameter of the Spherical...