Engineering, 28.06.2021 16:00, chops85
Question 3 (10 marks) i) A pontoon is 65m long, 18m wide and and 10m deep. It has a draft of 6.5m when floating in an upright condition. The centre of gravity of the pontoon is on the axis of symmetry, 0.75m above the water surface. Compute: a) The initial metacentric height (3 marks) b) The righting moment in fresh water when the angle of heel, is 12o . (3 marks
Answers: 2
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 06.07.2019 02:30, heavenwagner
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
Question 3 (10 marks) i) A pontoon is 65m long, 18m wide and and 10m deep. It has a draft of 6.5m wh...
Mathematics, 03.09.2019 23:30
Mathematics, 03.09.2019 23:30
History, 03.09.2019 23:30
Computers and Technology, 03.09.2019 23:30