) A 0.5 m3 adiabatic tank contains steam at 1000 kPa and 350 C and is connected to a discharge line that is maintained at 100 kPa. The valve is opened and the tank decreases in pressure until it reaches 100 kPa. Determine the quality of the steam in the tank at the final state and the mass discharged.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency