Engineering, 17.06.2021 21:00, lindsaypre0644
Consider the same piping system. this time, the same pipe is buried underground. assuming that there is a constant heat flux of 100w/m^2 from the outer surfance of the pipe to the soil determine the exit temperature of the water.
a. 129.1
b. 111.1
c. 82.1
d. 68.1
Answers: 3
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Consider the same piping system. this time, the same pipe is buried underground. assuming that there...
Social Studies, 03.12.2019 03:31
Mathematics, 03.12.2019 03:31
Mathematics, 03.12.2019 03:31
Mathematics, 03.12.2019 03:31
Biology, 03.12.2019 03:31