Engineering, 17.06.2021 14:00, danniuhrig

A cold drawn shaft of 1144 steel is loaded with alternating bending moment and steady torsion 202.2 N. m and 31.6 N. m., respectively. Use the information listed below to find the safety factor using modified Goodman failure criterion. - The small and larger diameters are 25 mm and 50 mm, respectively. - All transitions in the shaft are filleted with radius of 1 mm. - The shaft operates at room temperature - The reliability goal is 99.9

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 19:10, brid7931

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

continue

Engineering, 04.07.2019 19:20, GusGus11

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

continue

Do you know the correct answer?

A cold drawn shaft of 1144 steel is loaded with alternating bending moment and steady torsion 202.2...