Engineering
Engineering, 16.06.2021 04:40, nell1234565

Cho các tiến trình P1,p2,p3,p4 với thời gian sử dụng CPU lần lượt là 1,5,7. Thời gian nhập của các tiến trình là 0,3,7,5(s). BIết thời gian nạp của các tiến trình là 6,0,3,7. Tính thời gian chờ của tiến trình p2 theo phương pháp lập lịch SJF không ưu tiên

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
image
Engineering, 04.07.2019 19:10, batmanmarie2004
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Do you know the correct answer?
Cho các tiến trình P1,p2,p3,p4 với thời gian sử dụng CPU lần lượt là 1,5,7. Thời gian nhập của các t...

Questions in other subjects:

Konu
Biology, 20.01.2021 19:50
Konu
Mathematics, 20.01.2021 19:50
Konu
Mathematics, 20.01.2021 19:50
Konu
Mathematics, 20.01.2021 19:50
Konu
Arts, 20.01.2021 19:50