Engineering
Engineering, 11.06.2021 08:20, suewignall

A track dozer cost $165,500 to purchase. FOG and minor maintenance are estimated at $35.00 per operating hour. A major engine repair costing $26,000 will be required after 7.200 hr The expected resale price (salvage value) 21.0% of the original purchase price. The machine should last 10,800 hrs. How much should the owner of the machine charge per hour of use, if it is expected that the machine will operate 1,800 hours per year? The company's cost of capital rate is 7.30% A track dozer cost $165,500 to purchase. Fuel, oil, grease, and minor maintenances (usage) are estimated to cost $35.00 per operating hour. A major engine repair costing $26,000 will probably be required after 7,200 hr of use. The expected release price (salvage value) is 21% of the original purchase price. The machine is expected to have a useful life of 10,800 hr. The machine is expected to operate 1,800 hr per year. The company's cost of capital rate is 7.3%. a) Calculate the annual ownership cost. b) Calculate the annual usage cost. c) Calculate the annual repairs cost. d) Calculate the annual selvage value. e) Calculate the annual total cost. f) Calculate the hourly total cost.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
image
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Do you know the correct answer?
A track dozer cost $165,500 to purchase. FOG and minor maintenance are estimated at $35.00 per opera...

Questions in other subjects:

Konu
Physics, 23.06.2019 15:00