Engineering, 28.05.2021 16:20, dokithefursona
An adsorption column with a diameter of 2.0 cm and a bed height of 5.8 cm was used to isolate the digestive enzyme, trypsin. The concentration of trypsin in the feed was 0.190 mg/mL. The flow rate of the feed was 0.109 cm3/sec. The void volume in the bed was 0.35. The bulk density of the adsorbent (in its hydrated state in the bed) is 1.03 g/cm3. The volumes eluted at breakthrough (0.1yF) and exhaustion (0.9yF) were 150 and 450 cm3, respectively. (Recall that volume eluted and time can be related through the volumetric flow rate.)
(a) Estimate the loading of trypsin on the adsorbent (mg/g) at breakthrough and at exhaustion for the feed concentration given.
(b) If you choose a breakthrough concentration of 0.01 mg/mL at 200 cm3, what is the fraction of adsorbent bed utilized?
Answers: 2
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
An adsorption column with a diameter of 2.0 cm and a bed height of 5.8 cm was used to isolate the di...
Mathematics, 17.11.2020 06:50
English, 17.11.2020 06:50
Mathematics, 17.11.2020 06:50
French, 17.11.2020 06:50
History, 17.11.2020 06:50
History, 17.11.2020 06:50
Mathematics, 17.11.2020 06:50