Engineering, 25.05.2021 21:30, riverviewfarm2133

Please help me with this problem using steam tables :,( A cylinder-piston system contains 2 kg of H2O at 150 kPa and has a volume of 0.35 m3. The piston moves causing the final volume in the cylinder to be 2.314 m3. During the movement of the piston from the initial to the final state there is heat transfer into the cylinder, which keeps the temperature constant.
a) What is the final pressure in the cylinder?
b) How much work did the water vapor do?
c) Evaluate the heat transfer during the process.
d) Draw the process in P-v and P-h diagrams, marking the initial state as 1 and the final state as 2.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Do you know the correct answer?

Please help me with this problem using steam tables :,( A cylinder-piston system contains 2 kg of H...