Engineering, 21.05.2021 07:10, bankskry

A sag curve and crest curve connect a -3.5% tangent section of highway (to the west) with a +2.5% tangent section of highway (to the east). The +2.5% tangent section is at a higher elevation than the -3.5% tangent section. The two tangent sections are separated by 1150 ft of horizontal distance. If the design speed of the curves is 50 mph, (a) what is the common grade between the sage and crest curves (G2 of the sag and G1 of crest, from west to east), and (b) what is the elevation difference between the PVC, and PVTc?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 19:10, alex6toes

What are the major differences between injection molding and extrusion?

Answers: 2

continue

Do you know the correct answer?

A sag curve and crest curve connect a -3.5% tangent section of highway (to the west) with a +2.5% ta...