Engineering, 20.05.2021 18:10, smmailloux2335

R-134a refrigerant enters a compressor, with a mass flow of 5 kg / s and negligible speed. The refrigerant enters the compressor as saturated vapor at 15 ° C and leaves the compressor at 1800 kPa and a speed of 60 m / s. The work done on the refrigerant is measured as 133.4 kW. If the difference in elevation between the inlet and outlet is negligible, determine the heat transfer corresponding to this process, in k

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Engineering, 04.07.2019 19:10, shayshay7874

An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling

Answers: 2

continue

Do you know the correct answer?

R-134a refrigerant enters a compressor, with a mass flow of 5 kg / s and negligible speed. The refri...