Engineering, 19.05.2021 19:50, 604341

Calculate the basic performance for 'PA-28-161 PIPER WARRIOR III' aircraft at sea level on the earth: a/ Service ceiling

As I know the formula of the Service ceiling (photo attached), but I don’t know how to apply it specifically. Thank you so much.
=
Here is the aircraft information and data:
- alpha = 0pi/180 (Trim Angle of attack [rad]. This should be zero since)
- alpha_0 = -2.6pi/180 (Airfoil zero-lift AOA [rad])
- Trim altitude [ft] = 0
- Aspect ratio of the wing = 7.2
- Span of the flap [ft] = 16.92 (Aileron total span)
- Span of the wing = 10.668 m
- Drag coefficient at zero lift (parasite drag) = 0.035
- 2-D maximum lift coefficient of wing = 6.22
- Cm_0_r = -0.072 (Zero lift pitching moment coefficient of the wing root)
- Cm_o_t = -0.072 (Zero lift pitching moment coefficient of the wing tip)
*** Cm_0_r = Cm_o_t because wing has no twist
- Mean aerodynamic chord of the wing [ft] = 4.846
- Oswald's efficiency factor (e_os) = 0.8333
- Weight of Airplane = 10846.44 N
- Power of the engine (Pe) = 119312
- Propeller efficiency (ηp) = 0.83
- Area of wing surface (s) = 15.806 m
- κ— proportionality constant = 1

Calculate the basic performance for 'PA-28-161 PIPER WARRIOR III' aircraft at sea level on the eart

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Do you know the correct answer?

Calculate the basic performance for 'PA-28-161 PIPER WARRIOR III' aircraft at sea level on the earth...