Engineering
Engineering, 19.05.2021 18:20, mrstealyogirl40

Prediction of filtration time and washing time. the slurry used in problem 14.2-1 is to be filttered in a plate-and-frame press having 30 frames and 0.873 m 2 area per frame. the same pressure, 46.2 kn/m 2, will be used in constant-pressure filtration. assume the same filter cake properties and filter cloth, and calculate the time to recover 2.26 m 3 of filtrate. at the end, using through washing and 0.283 m 3 of wash water, calculate the time of washing and the total filter cycle time if cleaning the press takes 30 min.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
image
Engineering, 04.07.2019 19:10, jennymares
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
image
Engineering, 04.07.2019 19:20, zoebtharpe
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
Do you know the correct answer?
Prediction of filtration time and washing time. the slurry used in problem 14.2-1 is to be filttered...

Questions in other subjects:

Konu
Mathematics, 11.05.2021 22:10