Engineering, 19.05.2021 18:00, jasminelynn135owmyj1

A spring-mass-damper instrument is employed for acceleration measurements. The spring constant is 12000 N/m. The mass is 5 g. The damping ratio is 0.4. Required:
a. Find natural frequency (in Hz) of this instrument.
b. Determine the bandwidth of this instrument in Hz
c. How can you increase the bandwidth of this instrument?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 06.07.2019 03:30, carolina1636

The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.

Answers: 2

continue

Engineering, 06.07.2019 05:10, xmhllo

Air in a piston-cylinder is at 30°c, 100 kpa and 50% relative humidity. the air is compressed to 150 kpa in an isothermal process. the relative humidity in the final state is

Answers: 3

continue

Do you know the correct answer?

A spring-mass-damper instrument is employed for acceleration measurements. The spring constant is 12...