Engineering, 19.05.2021 18:00, TradeOK158

A cross beam in a highway bridge experiences a stress of 14 ksi due to the dead weight of the bridge structure. When a fully loaded tractor-trailer crosses over the bridge, however, the stress in the beam increases to 45 ksi. The beam is fabricated from steel with an ultimate tensile strength of 76 ksi, a yield strength of 50 ksi, and an endurance limit of 38 ksi. Find the safety factor for an infinite fatigue life: a. if the effect of mean stress on fatigue strength is ignored
b. when the effect of mean stress on fatigue strength is considered.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Do you know the correct answer?

A cross beam in a highway bridge experiences a stress of 14 ksi due to the dead weight of the bridge...