Engineering, 18.05.2021 01:00, madimocaj

Please help and show all work. I am extremely behind on this. Thanks 1. A worker on a zip line crew lifts participants weighing approximately 200 lb several times a day from the ground 20 feet below. A block and tackle system is designed with 50 lb of effort force designed to lift the materials.
--a. What is the required actual mechanical advantage?
--b. How many supporting strands will be needed in the pulley system?

2. A simple gear train is composed of three gears. Gear A is the driver and has 10 teeth, gear B has 8 teeth, and gear C has 20 teeth.
--a. If the output is at C, what is the gear ratio?
--b. If gear A rotates at 60 rpm, how fast is gear C rotating?
--c. If the output of torque at gear C is 150 ftlb, what is the input torque at gear A?

3. Look at the picture provided.
--a. What class of lever is shown in the figure? (How do you know?)
--b. How much effort force is needed to balance the 100 lb load?

Please help and show all work. I am extremely behind on this. Thanks

1. A worker on a zip line cr

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

Please help and show all work. I am extremely behind on this. Thanks 1. A worker on a zip line crew...