Engineering
Engineering, 16.05.2021 08:40, eila3601

Design a control system to control the Level of a tank under the following requirements.
1. When the level reaches L1, Pump is OFF, the Valve 1 is ON
2. When the Level reaches LO, Pump is ON, The Valve is OFF
3. LEDS are used to indicates the Level status.
4. LO and L1 are adjustable.
5. The position of Valveis adjustable.
6. The Data are transmitted to PC.
Use Multisim to simulate the system.
(please provide me how to solve it) ​

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Do you know the correct answer?
Design a control system to control the Level of a tank under the following requirements.
1. Wh...

Questions in other subjects:

Konu
Mathematics, 29.04.2021 21:40