Material Properties Quiz 2A
Name:
SHOW ALL FORMULAS AND WORK FOR FULL CREDIT. CIRCLE ANSWERS...
Engineering, 14.05.2021 18:20, haleysmith3456
Material Properties Quiz 2A
Name:
SHOW ALL FORMULAS AND WORK FOR FULL CREDIT. CIRCLE ANSWERS WITH
PROPER UNITS SHOWN.
1.
Which diagram best represents a free body diagram for block A?
2. Using the NET forces GIVEN below, what would be the magnitude of the force
Answers: 3
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 19:10, jennymares
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
Engineering, 06.07.2019 03:20, shelbellingswo
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
Engineering, 06.07.2019 04:10, idjfjcjs584
Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg. k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft
Answers: 1
Biology, 08.02.2021 18:10
Mathematics, 08.02.2021 18:10
Mathematics, 08.02.2021 18:10
English, 08.02.2021 18:10