Engineering, 14.05.2021 03:10, ayoismeisalex
The evaporator of a refrigeration cycle is basically a heat exchanger in which air is cooled by a refrigerant evaporated by absorbing heat from the air. R-134a enters an evaporator at 140 kPa with a quality of 10% and a flow rate of 0.01 m3/s. The refrigerant leaves the evaporator at the same pressure superheated by 8.77oC. The air flow rate is 10 kg/s. Determine (a) the rate of heat absorbed from the air and (b) the temperature change of air.
Answers: 1
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
The evaporator of a refrigeration cycle is basically a heat exchanger in which air is cooled by a re...
Arts, 05.10.2019 21:30