Engineering
Engineering, 12.05.2021 02:10, donttrip10

Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60 m3/s at 100 bar, 320 K. The compressor pressure ratio is 20, and the maximum cycle temperature is 2200 K. For the compressor, the isentropic efficiency is 92% and for the turbine, the isentropic efficiency is 95%. Determine (a). the net power developed, in MW, (b). the back work ratio, and (c). the thermal efficiency of the cycle.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
image
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Do you know the correct answer?
Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60 m3/s at...

Questions in other subjects:

Konu
Mathematics, 17.12.2020 21:50
Konu
Physics, 17.12.2020 21:50