Engineering, 10.05.2021 16:10, stump76

The stamping division at Bass Auto Works performs all necessary metal stamping operations for body panels. This is a 16 hour/day, 240 days/year operation. Currently, there are 30 stamping lines. Data on the breakdown and repair times of the lines has been analyzed by a group of Senior Design Students at State College. They determined that it was reasonable to assume that both are exponentially distributed. The mean time to failure for a single stamping line was found to be about 6.5 hours. The division currently employs 4 repairmen who work in teams of 2. When a stamping line breaks down, a single team is sent to repair it. The average repair time for a stamping line is about 4 hours. Required:
a. Develop a model for this system. Define states and events.
b. How many repair crew is needed to meet the assembly demand?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Do you know the correct answer?

The stamping division at Bass Auto Works performs all necessary metal stamping operations for body p...