Engineering, 06.05.2021 22:20, AnNguyen

Consider a plate whose top surface is being cooled by air where as the bottom surface is exposed to a hot stream at 200 C with a convection heat transfer coefficient of 35 W/m2 .K. The air thermal conductivity is 0.243 W/m. K whereas the thermal conductivity of the plate is about 237 W/m. K. If the bottom surface of the plate 150 C, determine the temperature gradient in the air and the temperature gradient in the plate at the top surface of the plate.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Do you know the correct answer?

Consider a plate whose top surface is being cooled by air where as the bottom surface is exposed to...